It is by using natural resources such as tidal or wind energy – collectively known as ‘Green Energy’ – that we could meet our daily energy needs. They are considered ‘Green’ because they are environmentally friendly. The older energy skill sets have had value for years, especially when we think of wind power and windmills. Regardless of this, we are mainly talking about using modern techniques to offer planet friendly and eco-efficient solutions.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. Then we have the ancient energy of the Sun and the heat that comes from it – now called Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines, we are finally getting to very old forms of energy production.

Solar Thermal Energy – By using different technologies, Solar Energy is effectively made up of two types of solar panels. As a first strategy, we have Solar Water Heating Collectors – which basically creates hot water from solar energy. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. Solar Water heating systems are extremely important – and can provide over half of the hot water needs for houses within the UK. The typical cost for installation ranges from 500-1500 pounds for a DIY system, all the way through to 2-5k for a professional fit.

Biomass Energy and ‘Energy Crops’ – This is a ‘capture all’ phrase which includes all natural materials. e.g. Wood, straw and poultry litter – but nowadays also includes modern ‘Energy Crops’. It’s the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. Indeed, within the European Markets, the UK has some of the leading levels of Biomass material at hand. It is the minimal C02 produced, alongside the actual energy production, that makes this attractive to the markets. As each tree felled, it is replaced by another. This helps to reduce the overall effect on C02.

By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ‘Energy Crops’ return overall. Perennial grasses are also responsible for large quantities of dry matter. Municipal and Agricultural waste products are both little known, but essential materials to this field. Under normal agricultural activity, agricultural waste is a natural by-product. Whereas Municipal Waste is derived from wood or food – and can be used for biomass energy.

Geo-Thermal Energy Technology: Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. Although heat pumps require energy to function, their rate of return is superb – being a four-fold benefit over the energy put in. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.

Wind Energy – An Update On Old Technology: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage – and cannot be stored. The UK is considered as one of the best sources of wind generation within Europe. For the fact remains that, within the UK, we have the ability to generate 10 percent of our requirement from Wind Production – as opposed to the current value of only 1 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. Due to this, we are looking at 6-9 months in total to cover the costs.

Then there is Hydropower – something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. That said, this type of energy can generate around 2 percent of the total electrical demand for the UK.

By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. Turbines use either a water drop (e.g. through a dam) or by a natural ‘run of the river’ – thereby having no water storage reservoir. ‘Micro-Hydro’ however utilises old outdated sluices and dams. Whilst considered a smaller form of electrical output, this system is thought to be able to give some 200mW of capacity to the UK. When considering the installation cost of items such as this, we’re looking at somewhere between 200 pounds and 3k per kW of energy created.

It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.

With the bulk of development work in the domestic area, both Plumbers and Electricians are set to capitalise in this area. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.

(C) S. Edwards 2009. Hop over to www.electricaltrainingcoursesgb.co.uk/SolarEnergyCourses.html or Solar Energy Training.